Getting started -42 – NISSAN 2010 Frontier User Manual

Page 208

PHONE/END
While the voice recognition system is
active, press and hold the

button

for 5 seconds to quit the voice recogni-
tion system at any time.

TUNING SWITCH
While using the voice recognition
system, tilt the tuning switch up or
down to manually control the phone
system.

GETTING STARTED

The following procedures will help you get

started using the Bluetooth

ா Hands-Free Phone

System with NISSAN Voice Recognition. For ad-

ditional command options, refer to “List of voice

commands” in this section.

Choosing a language

You can interact with the Bluetooth

ா Hands-Free

Phone System using English, Spanish or French.
To change the language, perform the following.

1. Press and hold the

button for more

than 5 seconds.

2. The system announces: “Press the

PHONE/SEND (

) button for the

hands-free phone system to enter the

speaker adaptation mode or press the
PHONE/END (

) button to select a dif-

ferent language.”

3. Press the

button.

For information on speaker adaptation, see

“Speaker adaptation (SA) mode” in this sec-

tion.

4. The system announces the current language

and gives you the option to change the lan-

guage to Spanish (in Spanish) or French (in

French). To select the current language,
press the PHONE/SEND (

) button. To

select a different language, tilt the tuning
switch (

) up or down.

NOTE:

You must press the

button within 5

seconds to change the language.

5. If you decide not to change the language, do

not press either button. After 5 seconds, the

VR session will end, and the language will

not be changed.

Pairing procedure

NOTE:
The pairing procedure must be performed

when the vehicle is stationary. If the vehicle

starts moving during the procedure, the

procedure will be cancelled.

Main Menu

“Connect phone”

᭺

“Add phone”

᭺

Initiate from handset

᭺

Name phone

᭺

1. Press the

button on the steering

wheel. The system announces the available

commands.

2. Say: “Connect phone”

᭺

. The system ac-

knowledges the command and announces

the next set of available commands.

3. Say: “Add phone”

᭺

. The system acknowl-

edges the command and asks you to initiate

pairing from the phone handset

᭺

4-42

Heater, air conditioner, audio and phone systems