NISSAN 2011 Cube - Manual (Page 82)

Black plate (80,1)
Model "Z12-D" EDITED: 2010/ 9/ 27
SIC4125
VEHICLE INFORMATION DISPLAY
When the ignition switch is placed in the ON
position, the vehicle information display shows
the following information:
1. Outside air temperature (if so equipped)
2. Continuously Variable Transmission (CVT) posi-
tion indicator (if so equipped)
3. Odometer/Instrument brightness control display
4. Twin trip odometer/Trip computer
OUTSIDE AIR TEMPERATURE (if so
equipped)
The outside air temperature is displayed in 8F or
8C.
When the outside air temperature becomes
37
8F (38C) or lower, the outside air temperature
display blinks to give a warning. The display will
stop blinking after 1 minute or when the outside
air temperature becomes 39
8F (48C) or above.
The display may differ from the actual outside
temperature displayed on various signs or bill-
boards.
CONTINUOUSLY VARIABLE TRANS-
MISSION (CVT) POSITION INDICATOR
(if so equipped)
The Continuously Variable Transmission (CVT)
position indicator indicates the selector lever
position when the ignition switch is in the ON
position.
SIC4126
TRIP COMPUTER
The switch for the trip computer is located on
the meter panel.
When the ignition switch is placed in the ON
position, modes of the trip computer can be
selected by pushing the trip computer mode
switch
*
A .
Each time the trip computer mode switch
*
A is
pushed, the display will change as follows:
(TRIP A ? TRIP B) ? Current fuel consumption
? Distance to empty (dte) ? Average fuel
consumption
? Average speed ? Elapsed time
(Canada only) ? Maintenance information
(Canada only) ( ? TRIP A)
2-8 Instruments and controls