NISSAN 2012 Sentra - Manual (Page 57)

10. If the child restraint is installed in the front
passenger seat, place the ignition switch in
the ON position. The front passenger air bag
status light or should illumi-
nate. If this light is not illuminated, see ЉFront
passenger air bag and status light Љ in this
section. Move the child restraint to an-
other seating position. Have the system
checked by a NISSAN dealer.
After the child restraint is removed and the seat
belt is fully retracted, the ALR mode (child re-
straint mode) is canceled.
INSTALLING TOP TETHER STRAP
First, secure the child restraint with the LATCH
lower anchors (rear outboard seat positions only)
or the seat belt, as applicable.
1. Flip up the anchor cover
᭺
1 from the anchor
point which is located directly behind the
child seat.
2. If necessary, raise or remove the head re-
straint to position the top tether strap over
the top of the seatback. If the head restraint
is removed, store it in a secure place. Be
sure to reinstall the head restraint when the
child restraint is removed. See “Head re-
Forward-facing – step 10 (Type A)
LRS0351
Forward-facing — step 10 (Type B)
LRS0316 LRS0723
1-38 Safety—Seats, seat belts and supplemental restraint system