Mowing with a mulching attachment, Operation instructions – Dixon GRIZZLY 52 KOH/968999588 User Manual
Page 32
OPERATION INSTRUCTIONS
32
MOWING WITH A MULCHING ATTACHMENT
Mulching or recycling the grass clippings requires a totally different
mowing approach than would be normal when side discharging or
bagging the grass. There may be instances or conditions where it is
not possible to hide all the recycled or mulched clippings.
In order to achieve the best results, please read and follow the
mulching tips listed below:
1. Read and follow the installation instructions that are included
with your mulcher.
2. Set the engine speed control to the wide open or full setting.
3. Place the mower deck cut height selector in either the top or
second notch. Never cut more than ¾" (19 mm) to 1" (25mm)
off the grass at any one time. Attempting to cut more grass will
result in the deck plugging and cause the engine to stall.
4. It may be necessary to cut the lawn twice to achieve acceptable
mulching performance especially on first cuttings or if the lawn
is heavily fertilized.
5. Do not attempt to cut grass when it is wet. Mulching
performance will be very poor in wet grass conditions.
6. Maintain sharp blades throughout the cutting season. This is
very important. Optimal mulching performance cannot be
obtained with a dull or nicked blade.