Hyundai H-CMMD4043 - Manual (Page 46)

46
3. PG, 4. PG-13, 5. PG-R, 6. R, 7. NC-17, 8. Adult (with the least limit when playing).
When the rating is set go to PASSWORD setting and insert the password to lock the parental control.
Load factory: select RESET to restore the factory default. But Password and Rating will remain unchanged.
Hardware
Camera IN: Choose either NORMAL or MIRROR images viewing.
TFT auto open: set the monitor working mode when the unit is ON and
OFF: On (when the unit is off the monitor draws down into the unit
automatically, when it s on the monitor unfurls automatically), OFF (when
the unit is off the monitor draws down into the unit automatically, when it s
on the monitor unfurls by pressing the OPEN/CLOSE button on the panel),
Manual (when the unit is off or on the monitor draws down or unfurls only
by pressing the OPEN/CLOSE button on the panel).
Video output: there are three modes for the TFT display coulour system of
your unit: NTSC, PAL, AUTO,
P.Vol : set the volume level that is more comfortable for you. This function is
to prevent too sharp change when you switch one playing current source to
another:
- SOURCE: select one playing sourece to set P.Vol function/
- Level: set the volume level from 1 to 6.
TS CAL
Use the CAL screen when the touch screen is not sensitive or valid. Calibrate it following the clew displayed on
the screen after entering the SCREEN CAL mode.