Oldsmobile 1999 Silhouette User Manual
Page 111
yellow
blue
2-15
To change the mode:
1. Follow the instructions for “Entering Programming
Mode” listed previously.
2. Turn the interior lamps control all the way clockwise
and then back slightly counterclockwise.
3. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is in.
You can change the mode by turning the interior
lamps control all the way clockwise and then back
slightly counterclockwise.
4. Repeat Step 2 until you hear the number of chimes
that matches the mode you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
Automatic Door Locks
With Automatic Door Locks, all doors will
automatically lock when you shift out of PARK (P) and
automatically unlock when the ignition is turned to OFF.
To customize these features to your preference, see
“Programmable Modes” following.
Programmable Modes
Your vehicle can be programmed to one of the
following modes.
Mode 1: Both Features Off (Automatic door locking
and unlocking is disabled. You will always need to lock
your doors manually before driving to increase
occupant safety.)
Mode 2: Automatic Door Locking Only
D The automatic door unlock feature is turned off.
D Shift out of PARK (P) with the ignition on and the
driver’s door closed; all doors will lock automatically.
Mode 3: Automatic Unlocking with the Ignition Off
D Turn off the ignition with the transaxle in PARK (P);
all doors will unlock automatically.
D Shift out of PARK (P) with the ignition on and the
driver’s door closed; all doors will lock automatically.
Mode 4: Automatic Unlocking with Transaxle in PARK (P)
D Shift into PARK (P) with the ignition on; all doors
will unlock automatically.
D Shift out of PARK (P) with the ignition on and the
driver’s door closed; all doors will lock automatically.
Vehicles are delivered programmed in Mode 3.