Oldsmobile 1999 Cutlass User Manual
Page 191
yellow
blue
5-7
9. Now connect the black
negative (
-
) cable to
the good battery’s
negative (
-
) terminal.
Don’t let the other end
touch anything until the
next step. The other
end of the negative
cable doesn’t go to the
dead battery.
It goes to a heavy unpainted metal part on the engine of
the vehicle with the dead battery.
10. Attach the cable at least 18 inches (45 cm) away
from the dead battery, but not near engine parts that
move. The electrical connection is just as good
there, but the chance of sparks getting back to the
battery is much less.
11. If the THEFT SYSTEM light flashes, wait until the
light stops flashing. Now start the vehicle with the
good battery and run the engine for a while.
12. Try to start the vehicle with the dead battery.
If it won’t start after a few tries, it probably
needs service.