Oldsmobile 2001 Intrigue - Manual (Page 282)

6-41
License Plate Lamp 1. Remove the four screws to remove the name plate.
2. Reach your hand up through underside of the trunk
into the slots.
3. Press the clip on one side of the bulb assembly
and pull out the assembly from the front with your
other hand.
4. Remove the old bulb from the socket.
5. Place the new bulb into the socket.
6. Reverse Steps 1 through 3 to reinstall.
When reinstalling bulb assembly, push in the assembly
until you hear a snap. Make sure the assembly is tight.