Onboard computer – Mini 2004 Cooper User Manual

Page 59

ONBOARD COMPUTER

Mode selection

With the ignition key in position 1 and higher,
you can use the button in the turn signal indi-
cator lever to retrieve information from the
onboard computer for display in the tachom-
eter. By pressing the button briefly, you can
call up a new function for display.

The displays appear in the following order:
Outside temperature, range, average con-
sumption and current consumption, aver-
age speed and current speed.

Starting with ignition key position 1, the
last active setting is displayed.

If the vehicle is equipped with a navi-
gation system, you will find more

information on the onboard computer in
the navigation system Owner's Manual.

Outside temperature

If the vehicle is equipped with a tachome-
ter, but not with an onboard computer, the
outside temperature is displayed.

You can have the units

6 or 7 set

by your MINI Dealer.

Ice warning

If the outside temperature falls below
approx. 37

7 / +36, the onboard com-

puter automatically switches to the outside
temperature display.
In addition, an acoustic signal can be heard
and the display flashes for a short time.

The ice warning does not exclude the
possibility that surface ice can form

at temperatures above 37

7 / +36, e.g.

on bridges and shaded roads.

With navigation system option:

The temperature is displayed in the status
line of the navigation system, refer to the
Owner's Manual for the navigation system.

Current vehicle speed

If the vehicle is equipped with a tachome-
ter, but not with an onboard computer, the
current vehicle speed is displayed.

With the ignition key in position 1 and
higher, you can use the button in the turn
signal indicator lever to call this up in the
tachometer display. Briefly press the but-
ton to switch the display from the outside
temperature to the current vehicle speed.