Re p la c ing co mp o n en ts – Mini 2010 Cooper Convertible User Manual

Page 132

ing co

130

MINI Mobility System, refer to the following
section

Run-flat tires, page

114

Tire change with space-saver spare tire,
page

132

MINI Mobility System with onboard
vehicle tool kit and tire change set*

Preparations

Use of the MINI Mobility System may be ineffec-
tive if the tire puncture measures approx. 1/8 in/
4 mm or more. Contact the nearest MINI dealer
if the tire cannot be made drivable with the
Mobility System.
Do not remove foreign bodies which have pen-
etrated the tire if possible.

Follow the instructions on using the Mobil-
ity System found on the compressor and

the sealant bottle.

Remove the adhesive label for the speed limit
from the sealant bottle and affix it to the steer-
ing wheel.
The Mobility System with onboard vehicle tool
kit and tire change set

is located under the

floor mat in the cargo bay.

1 Sealant bottle
2 Hexagon wrench

3 Extractor hook

4 Vehicle jack

5 Wheel stud wrench
6 Flat screwdriver/Phillips screwdriver, towing

eyelet

7 Compressor

Sealant and compressor

1 Sealant bottle and adhesive label with speed

limit

2 Filling hose

Note the use-by date on the sealant bot-
tle.

3 Holder for the sealant bottle
4 Compressor
5 Plug and cable for the socket in the vehicle

interior, page

6 Connection hose to connect the compressor

and sealant bottle or the compressor and
wheel

7 On/off switch
8 Pressure gauge for indicating the tire infla-

tion pressure

9 Release button for reducing the tire inflation

pressure

Connector, cable and connection hose are
stored in the compressor housing.

Using the Mobility System

To repair a tire puncture with the Mobility Sys-
tem, proceed as follows: