Lenco XEMIO-858 - Manual (Page 3)

1. Basic controls and interfaces of the player
Item Description Item Description
1 ON / OFF Button (Power) 6 Earphone Output Jack (3.5mm Stereo)
2 TFT Display (Touch Function) 7 Memory Card Slot (Micro SD Card)
3 V Button 8 Mini USB Port (PC Connection / Charge)
4 V Button 9 Microphone (mono)
5 Reset (Built-In Tact Switch)
2. Internal Battery
The player has an internal battery. When using the unit for the first time, charge it for 3 hours or until the
battery icon is show the battery is in full.
Note: The player continues to use battery power after it’s been turned to off, if unit isn’t used for a while, the
battery might need to be charged.
3. Connection and Charging
•
Once you have connected player with computer / Power charger, then you will see the “Opening” >
“Connect” or “Charging” screen.
•
In connect screen, the battery is in charging at background.
•
In charging screen, the bar levels are running in battery icon, the battery is in charging.
• The battery icon will show “Full” when the charging is completed. Disconnect it when it is done.