Lenco TFT-2411 - Manual (Page 16)

1. Use button to select what you want to adjust
in the Setup menu.
2. Press button to setup.
3. When you are satisfied with your adjustment, press
MENU button.
Country
This option allows you to select the country.
Auto Tuning
Press button to start auto tuning.
Note: Before you perform Auto Tuning, you must choose the country where you are by selecting
COUNTRY option.
Manual Tuning
Note: Before you perform Manual Tuning, you must choose the country where you are by selecting
Country option.
Press the MENU button on the front panel or on the remote control and then use button to select
the Setup menu, press button to enter(see the picture below).
SETUP menu options
(used in TV/DTV source)
Manual Tuning
Program
Sound System
Colour System
Program Lable
AFT
Manual Search 99
DK
Auto
Off
471.43MHz
Select Adjust Input
Auto tuning
Press OK key to start
Enter Return OK MENU
Program: Select the current channel.
Sound System: Select a corresponding sound system.
Color System: Select a corresponding color system.
Program Label: Name the current channel, you can also rename the program which you have named.
Press button to enter, and press button to select the position, then press button
or 0-9 button to enter the character, press OK button to confirm.
AFT: Due to weak signals or a wrong antenna configuration, some of the channels may not be turned
to the best reception condition. AFT function allows you to fine tune channel selected.
Manual Search: Press button to search.
0-9
Manual Tuning in TV mode
14