Lenco SPORTCAM-300 User Manual

Page 23

under water.

� Remember to put the Mode Switch in your desired recording position before inserting the camera in

the waterproof case. There is no external button for the Mode Switch.

� After every use in salt water you will need to rinse the outside of the housing with non-salt water and

dry. Not doing this can eventually cause corrosion of the hinge pin and salt buildup in the seal,
which can cause failure.

� To clean the seal, rinse in fresh water and shake dry (drying with a cloth may cause lint to

compromise the seal). Re-install the seal into the grooves in the backdoor of the housing.

Technical

parameters

Image sensor

5M pixels (CMOS)

Function mode

Video recording, photo, removable disk

Camera lens

F3.1

f=2.9mm

Digital zooming

Shutter

Electronic shutter

LCD display screen

2.4-inch touch screen

Image resolution

12M (4000 × 3000), 10M (3648x2736), 8 M (3264x2448), 5M (2560×1920)

Video resolution

VGA: 640x480 (120 frames / sec), HD: 1280x720 (60 frames/sec.) HD:
1280x720 (30 frames/sec), FHD: 1920x1080 (30 frames/sec.)