Lenco SCD-89 CD - Manual (Page 7)

CLEANING CD
If the CD skips or will not play , the disc may need cleaning
. Before playing, wipe the disc from the centre out with a
cleaning cloth. After playing, store the disc in its case.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly
wiping with a soft cloth.
IMPORTANT NOTE
If an abnormal display indication or an operating problem
occurs, disconnect the AC power cord and remove the
batteries. Wait at least 5 seconds, then reconnect the AC
power cord or reinstall the batteries.
WARNING
Should the CD door be opened before the reading of the
CD completed, a jamming noise may occur. This is resolved
by closing the CD door.
MAINTENANCE
CLEANING THE TAPE HEADS
To maintain optimum sound quality, clean the playback
heads ( a ) ,pinch rollers (b), and capstans (c) regularly
(every 10 hours of use ). Use a cotton swab lightly moistened
with cleaning fluid or denatured alcohol.
b c a
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow
several times on the lens and remove the dust with the
brush. Finger prints may be removed with a cotton swab
moistened with alcohol.
GB 5
TAPE PLAYBACK
1 . Set to TAPE
TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
To resume play, press the PAUSE button again.
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/
EJECT button to stop winding at the desired position.
FUNCTION
3 . Press the PLAY button.
2 . Insert the cassette.
PLAY
TAPE
If the unit is automatically off at Cass mode when ErP2 activates, pls press up all the cass keys before switch to
other mode in order to switch on the unit again.
Unit will be automatically off after 10mins without further operation.