Lenco SCD-26 User Manual

Page 6

PROGRAMMED PLAYBACK

Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be programmed.

1. Press the " PROGRAM " button.

2. Press the " NEXT/FF " and " BACK/FB " buttons to select the desired track number.

3. Press " PROGRAM " button again to memorize the track.

4. Repeat steps 2 and 3 until all desired tracks are programmed.

5. Press the " PLAY/PAUSE " button to start. " PROGRAM " is flashing on the CD display.

6. Press " STOP " button to stop programmed playback.

7. Press " PROGRAM " and " PLAY/PAUSE " buttons to resume programmed playback.

8. Open the CD door or turn off the CD player to clear the programmed memory.

Note : Programming can only be made when the player is in stop mode.

To Erase the Memory(Program)

To clear the program, you may have two ways:

Press STOP button when the disc is stopped, or

Open the CD compartment lid, program will be erased.

" PROGRAM "

PROGRAM

REPEAT PLAYBACK

Note on CD-R/RW discs

- Because of non-standardized format definition/ production of CD-R/RW, playback quality and performance are not

guaranteed.

- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions, such as PC performance,

writing software, media ability, etc.

- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.

- It is recommended to record only audio files on CD-R/RW discs for easy reading.

BASS BOOST

To enjoy a BASS BOOST sound effect,

press BBS button.

This function allows a single track or all tracks on a disc to be played repeatedly.

TO CANCEL REPEAT PLAYBACK FUNCTION

Press the REPEAT button again until " REPEAT " or

" REPEAT ALL " disappears from the display.

TO REPEAT THE SAME TRACK

Press the REPEAT button once during playback,

the CD display will indicate " REPEAT ".

TO REPEAT THE WHOLE DISC

Press the REPEAT button twice until " REPEAT ALL"

displays.

GB 4

PROGRAM PLAYBACK

CD display

REPEAT

PLAY

REPEAT

ALL

PLAY

MIX PLAY

Press " MIX " Button and " MIX " will be displayed.

CD Track Plays Randomly.

Press " STOP " button again to terminate the " MIX " mode.

CD display