Lenco SCD-2000 BT - Manual (Page 10)

10
Installing backup batteries
By installing batteries in the backup memory battery compartment, the device will
always be powered. The device needs to be powered to store the things in memory.
When the device is connected to the mains, the batteries will not be used. When
utility power fails, the device will automatically switch to the backup memory
batteries. Things that are stored in memory are the pair & play® data, preset radio
stations and clock settings. Open the battery compartment (22) located on the bottom
of the device to install the batteries.
Connecting the device to the mains
The device can be powered by connecting it to the mains. Connect one end of the
power cable, with the 8 shape, to the AC socket (23) located on the back of the
device. Connect the other end to a power outlet.