Lenco SCD-10 - Manual (Page 4)

Tun�ng � �A��IO �������n
1. Press the FUNCTION button repeatedly
until “TUNER” is shown.
2. Press the BAND / FOLDER button again to
select the desired frequency band ( FM or AM ).
3. Press the F - SKIP or B - SKIP
button as many times as required to
tune into the desired station.
4. Press and hold the F - SKIP or B - SKIP
button for more than 1 second ,
scanning starts automatically and the tuner will stop
at the first receivable broadcast station .
5. To stop auto tuning, press the F - SKIP
or B - SKIP button again.
GB 2
A��JU�TING THE �OUN��
Press volume +/- to adjust the volume level. Volume level
is shown on the display.
FO� ��IVATE LI�TENING
Plug headphones (ø3.5 mm stereo mini-plug) into the
PHONES jack. When headphones are plugged in, the
speakers will automatically be disconnected.
VOLUME
TU�N ON / OFF THE �Y�TEM
����c��ng FM �������/M��n�� m����
1. To select FM stereo/mono mode, press the STEREO/
MONO button on the unit.
2. The “STEREO” icon will be on when the received
station is broadcasted
in Stereo.
3. To select mono mode, press STEREO / MONO button
again.
4. The “STEREO” icon will never turn on in FM MONO
mode.
TUNE� O�E�ATION
VOLUME
FUNCTION
BAND/FOLDER
POWER / STANDBY
Press the POWER/ STANDBY button to turn the audio on. To change the audio mode between,
CD , UDISK , SD/MMC , AUX and TUNER, press the FUNCTION button while the power is on.
The audio mode will be displayed.
Power will be cut off automatically when the CD, MP3 and USB functions are in stop mode for
15 minutes.
FO� BETTE� �E�E�TION
FM AM
1. Tune to a desired radio station.
2. Press the PROGRAM / MEMORY / CLK - ADJ. button to enter tuning saving mode.
The “MEMORY” icon will be on.
3. Program number “01” will be flashing on the left hand side.
4. Within 10 seconds, press the RANDOM/P- or REPEAT/P+ button to select the
desired program number.
5. Press the PROGRAM / MEMORY / CLK - ADJ . button to confirm.
6. If there is no button pressed within 10 seconds, it will exit tuning save mode and the
“MEMORY” icon will be off.
�A��IO MEMO�Y FUN�TION
PROGRAM /
MEMORY /
CLK-ADJ.
SCD-10 NO IPOD LENCO ENGLISH NO 4 4 2011/11/2 11:05:13