Lenco Playlink-4 - Manual (Page 4)

6 7 EN - - EN
LENCO PLAYLINK 4 / PLAYLINK 4 with Battery INSTRUCTION MANUAL LENCO PLAYLINK 4 / PLAYLINK 4 with Battery INSTRUCTION MANUAL
4. Play music
Please make sure your mobile devices and speaker (s) are connected to the same
WiFi network.
4.1 From your mobile phone/ tablet:
a. Open the LENCO PLAYLINK app on your mobile phone/tablet and wait your speaker to
be displayed (Display “PLAYLINK4” or the friendly name if you setup already).
Note:
1. if you have several speakers connected on your network, it will appear as a list.
2. Depending the speed of the network, the speakers may need up to one minute
to be displayed.
b. Select the speaker on which you want to play, the app asks you to select the source of
the music.
c. Select : “Music on this device”, the songs presents on your mobile phone/ tablet are
displayed.
d. Browse the list and add the songs you want to play on your play list.
ANDROID IOS ANDROID IOS
ANDROID IOS ANDROID IOS
Press the WPS key of the router and the Quick Connect key of the speaker sim-
ultaneously. The LED on speaker is flashing fast (white). After around 10~40 seconds, the
Wi-Fi LED on speaker becomes stable white: The speaker is connected to your network.
3.2: Connect your speaker using a browser:
If your router does not have a WPS key, open the WLAN settings on your mobile phone or
on your computer and look for the WiFi network: PLAYLINK4 xxxxxx-AJ (xxxxxx depends
of your speaker serial number).
Select and connect to this network.
Open your browser, you will be automatically redirected on the login web page. If you are
not automatically redirected, type in your browser the address: 172.19.42.1
Input a friendly name for your speaker (this is the name that will be shown on your speaker
when you will play from your mobile phone), can be Living room, Bedroom, or whatever.
Select your network name in the scrolling menu, then input your home network password.
Click on “Connect”, your speaker is looking for your home network, when connected the
WiFi LED will turn to stable white.
LANU SB INTERNET
RESET
R ST L AUX IN MODE DC IN 20V 2.25V QUICK CONNECT RESET DIR.MODE
R ST L AUX IN MODE DC IN 20V 2.25V QUICK CONNECT RESET DIR.MODE