Lenco MMC-2900 - Manual (Page 6)

GB 4
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the skip buttons according to the desired skip direction.
• Play/back resumes from the selected track.
• When the button is pressed once during play, the previous track starts again.
• When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the or button pressed during playback, and release the button as soon as you
recognise the desired passage. Then normal CD playback will resume from this point.
TO STOP PLAYBACK
Press the STOP button.
For CD :
Total number of tracks and time will be shown.
For MP3/WMA/USB/SD/MMC :
Total number of tracks and folder
will be shown.
6. After disc read finished, the disc will play
automatically.
In stop mode, press the Enter/Play/Pause
button to play the track.
For CD :
Track number "001" will be shown,during normal compact
disc playback.
For MP3/WMA/USB/SD/MMC :
Track number "F01" will be shown, during MP3��WMA����B��
SD/MMC playback.
CD display
MP3 display
WMA display
USB display
SD/MMC display
COMPACT DISC PLAYBACK
2. Slide FUNCTION button
to CD position.
3. Open the CD door by pushing
Open / Close CD area.
4. Insert a disc with the label
side facing up.
5. Close the CD door,
the disc will rotate and total number of the folder will
show on the display.
For CD :
Track number "001" will be shown, the time of the track
"001" in flash, during normal compact disc playback.
For MP3/WMA/USB/SD/MMC :
Track number "F01" will be shown, the time of the track
"F01" and than "001"in flash, during MP3��WMA����B���D��
MMC playback.
TO INTERRUPT PLAYBACK
Press the Enter/Play/Pause button. Press the button
to resume playback.
CD display
MP3 display
WMA display
USB display
SD/MMC display
1. Turn on the unit by
press STANDBY button.
FUNCTION
CD