Lenco MCI-400 - Manual (Page 6)

ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET)
PRESS THE “ ID3 “ BUTTON UNTIL THE LCD DISPLAY (2) SHOW “ FILE - … ＂DURING PLAYBACK OF MP3/WMA FILE,
THE SONG TITLE / ARTIST NAME / ALBUM NAME IS BEING DISPLAYED IN SEQUENCE . PRESS THE “ ID3 ” BUTTON
AGAIN TO DISABLE THE FUNCTION.
REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, “ NO TITLE “ OR “ NO ARTIST “ IS BEING
DISPLAYED” ON LCD DISPLAY (2).
- NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MASS MEDIA IS NOT
SUPPORTING BY THE SYSTEM.
- THE SYSTEM SUPPORT ONLY ENGLISH TEXT FOR ID3 FUNCTION
MP3 TRACK FORMAT REQUIREMENT:-
- BIT RATE : 32 KBPS~320KBPS, SAMPLING RATE : 32KHZ, 44.1KHZ AND 48 KHZ DECODABLE
- THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND THE
METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER THAN NORMAL
CD DUE TO DIFFERENCE FORMAT.
z REPEAT/RANDOM MODE
PRESS THE “ PLAT MODE “ BUTTON (7)DURING PLAYBACK TO SELECT REPEAT AND RANDOM FUNCTION, A SINGLE
TRACK, SINGLE FOLDER (MP3 ONLY) OR ALL THE TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:-
FOR CD
(1) REPEAT 1 (2) REPEAT ALL TRACK (3) RANDOM (4) OFF MODE
INDICATOR
PLAY MODE ON LCD DISPLAY
REPEAT TRACK & FLASHING
REPEAT ALL
RANDOM RAN
OFF MODE --------------
FOR MP3/WMA DISC/FILE
(1) REPEAT 1 (2) REPEAT 1 FOLER (3) REPEAT ALL TRACKS
(5) OFF MODE (4) RANDOM
INDICATOR
PLAY MODE ON LCD DISPLAY
REPEAT SINGLE TRACK & FLASHING
REPEAT SINGLE FOLDER
REPEAT ALL TRACKS
RANDOM MODE RAN
OFF MODE -----------------
z REPEAT PLAY
YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.
z RANDOM PLAY
YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
CD / MP3 DISC PROGRAMMING
UP TO 20 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN THIS FUNCTION. BEFORE USE, BE SURE TO PRESS THE
“
STOP “ BUTTON (9)
1. SET IN CD MODE & STOP THE CD OR CD-MP3 PLAYBACK.
2. PRESS THE “MEMORY/CLK-ADJ” BUTTON (17) , “ MEM “ WILL FLASH ON LCD DISPLAY (2). MOREOVER, IT WILL
INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED – “ 0 P- 01 “.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP OR DOWN BUTTONS (10).
4. PRESS THE“MEMORY/CLK-ADJ” BUTTON (17) TO STORE THE TRACK INTO MEMORY.
E-6