Lenco MCi-220 - Manual (Page 3)

UK-2
INSTALLING THE SPEAKER WIRE TO THE SPEAKER
TERMINALS
1. Speakers Connection
Extend the SPEAKER WIRES and connect them to the SPEAKER
TERMINALS.
2. Power Cord Connection
Before using , connect the AC Power Cord to the AC outlet .Then
turn on the main switch of the unit. Standby indicator will light on.
COMPACT DISC
1. Always use a compact discs bearing the mark as
shown.
2. Notes on handling discs
Removing the disc from its storage case and
loading it.
* Do not touch the reflective recorded surface.
* Do not stick paper or write anything on the surface.
* Do not bend the disc.
3. Storage
* Store the disc in its case.
* Do not expose discs to direct sunlight or high temperatures,
high humidity or dusty places.
4. Cleaning a disc
* Should the disc become soiled, wipe off dust, dirt and
fingerprints with a soft cloth.
* The disc should be cleaned from the center to the edge.
* Never use benzene, thinners, record cleaner fluid or anti
static spray.
* Be sure to close the CD door so the lens is not contaminated by dust.
* Do not touch the lens.
INSTALLING THE UNIVERSAL DOCK
FROM THE CENTRE
TO THE EDGE
INCORRECT CORRECT
Universal Dock
adapter connection
(Dock adapter not included)
Push dock door will
open the iPod dock door.
REMOTE CONTROL
1. STANDBY BUTTON
2. MUTE BUTTON
3. OPEN/CLOSE BUTTON
4. CLOCK DISP BUTTON
5. DAB/FM/AUX BUTTON
6. SKIP/TUNE SEARCH DOWN BUTTON
7. TIMER BUTTON
8. SLEEP BUTTON
9. ID3/iPod/MEM/C-ADJ. BUTTON
10.RANDOM BUTTON
11.REPEAT BUTTON 12.CD/iPod/USB/CARD BUTTON
13.VOLUME (+ or -) BUTTON
14.EQ BUTTON
15.PLAY/PAUSE/SCAN BUTTON
16.SELECT/MONO/ST. BUTTON
17.SKIP/TUNE SEARCH UP BUTTON
18.STOP/MENU/INFO BUTTON
19.FOLDER UP BUTTON
20.FOLDER DOWN BUTTON
21.NUMBER SEARCH BUTTON
22.INTRO BUTTON
PUTTING THE BATTERIES INTO THE REMOTE
CONTROL UNIT
Press down the compartment cover, and slide the cover off to open
the compartment. Place the two (UM4), (AAA), (R03) batteries in
the remote control according to the polarity markings ("+" and " - ")
inside the compartment and on the batteries. Place the cover over
the compartment, press down lightly, and push it upward until it
snaps on.
Note: Remove the batteries from the remote control if not in use for
long period of the time. Do not mix normal batteries with rechargeable
batteries, when the batteries become weak, remote control will not
function and replace with new batteries.
**BATTERIES NOT
INCLUDED**
1
2
4
6
7
8
10
11
12
13
14
15
16
17
18
19
21
20
5
9
22
3
PUSH
OPERATING THE UNIT
POWER/STANDBY
2. Select the sound source (CD, iPod, USB, CARD) and (DAB, TUNER, AUX) by pressing the (CD, iPod, USB, CARD)
and(DAB, FM, AUX) button on the unit (or remote control). The corresponding display will light up.
3. Adjust the volume with the VOLUME (+ or -) control knob on the unit (or remote control).
4. Press the STANDBY/ON button on the unit (or remote control) again to turn off the unit.
When you first plug the unit into the AC outlet, then press the power switch on the rear of the unit, the unit will be
in standby mode, the black light of standby is red. You can now press the STANDBY/ON button on the unit or on the
remote control to switch the unit ON. Pull the AC plug out of the wall socket if you want to switch off completely.
1. Press the STANDBY/ON button on the unit or on the remote control to switch the unit on.
PUSH
AC MAIN POWER SWITCH
AC CORD
ON ON OFF OFF