Lenco LED-2215 - Manual (Page 29)

1.2.1.5 Time Setting
Press OK go to Time Setting below:
If a broadcaster provides GMT, you can set the time using GMT, or set your own time by
yourself. If the GMT usage is ON then the Current time is set automatically or you can set the
time zone. If your broadcaster provides the correct time offset then your receiver will change
from summertime to wintertime automatically. If you set GMT Usage to OFF, Set Data and
Set Time item are displayed.
To set the time value manually, move the cursor to the time item and use the numeric buttons
on the remote control.
1.2.2 Parental Control
Parental setting and can change the PIN code
The default PIN code is 0000.
ƔLock Setting
Channel Lock: Set the system channel lock to
NO or YES. If the channel lock is YES, the user
has to enter the parental PIN code correctly
before watching the locked channel.
Censorship lock: set the censorship class.
Ɣ Parental Setting
Press YELLOW key to set some channels to
lock status. If a channel is locked, the user has
to enter the parental PIN code correctly before
watching the locked channel.
27