Set up the configure of your internet radio – Lenco IR-1650 User Manual
Page 6

The if you select one of the stations, it prompt you loading station… the show you “BBC Radio 1
connecting… ” etc then you can enjoy your radio.
Set up the Configure of your internet radio
In the upper main menu, you can find
If you select
For<
Network configure>
Enables you to configure your radio’s network settings, scan again for a connection to another
wireless network , or to manually configure the network parameters. This is useful if you take the
Internet radio to another building where you want to use. It is possible to configure your radio to
connect to your network via an available
Press “Select” to do the set, Turn the TUNE until your appropriate equipment; you can find some
sub-menu in it
1> For
wizards. please see the step 1
2> For
3> For
4> For
5> For
device will auto set and get the IP address and gateway DNS etc settings, if you set the DHCP off,
you will be asked input these address or number for the network config.
6> For
warning.
TIPS: please use DHCP on as default sets, you can connect to network and get your internet radio
stations easy
For
For
portal on the internet . if there is new firmware available, the radio will prompt you if you want to
download it or not.
For
French, German, Dutch and Hungarian.
For
default settings, please be advised if you confirm to do this, the Preset, language, ESSID, network
configure etc will be set to default.
For
Version
BBS Radio 1Xtra
Media Player