Lenco IPD-4600 - Manual (Page 9)

1
2
3.
4
Select a suitable adaptor for your iPod (the one with your iPod at the time of purchase)
Caution :
Listening to iPhone / iPod
Please be careful when seating the iPhone / iPod into the docking to avoid
damaging the 30-pin connector on the iPhone / iPod or in the docking system.
This model adopts different iPhone / iPod models. If the docking port will not be used for
an extended period of time, it is recommended to cover the docking port by using the
"Dock Cover " insert (included).
Your iPhone / iPod can now be inserted into the docking port by placing the connector
on the bottom of the iPhone / iPod connector in the docking bay.
and insert it into the docking area.
Press the button on main unit or press STANDBY button on remote control to
turn on the unit.
To start playback music, press the PLAY/PAUSE button once.
To resume music , press the PLAY/PAUSE button again.
You may press the VOLUME + / - button to adjust the volume to a desired level.
To skip to next or previous song, press the / button from the remote
Note: The volume level cannot be adjusted using the volume control on your iPhone
/ iPod after being docked.
To mute the volume, press the MUTE button and the "MUTE" indicator blinks
on display.
Press the MUTE button again to resume listening the music.
To turn off the unit, press the button on main unit or press STANDBY button on
remote control until the "iPHONE" indicator disappear from the display.
When the unit is powered and once the iPhone / iPod connected to the docking station,
the unit recharges the iPod battery.
9
Press the FUNC button on main unit or press the iPHONE button from the remote control
to select iPhone/iPod mode. The "iPHONE" indicator is shown on the LCD display.
control.