Lenco HS-100 - Manual (Page 6)

5. LED light indications
“GREEN” SCAN LED ON
“GREEN” SCAN LED OFF
Scan in progress.
Standby/Scan is complete.
Scanning too fast.
May cause scanning error.
Restart and scan again.
“RED” ERROR LED ON
“RED” ERROR LED OFF
No error in scanning speed.
Continue scanning process.
Computer
6. Connect to computer
Turn on the device. Connect it to your computer as displayed in below picture and
follow the instructions on your monitor.
7. Specification
Image sensor A4 Color Contact Image Sensor
Number of sensor 5136 dots(1st~5104 dots available)
Resolution
Low resolution : 300x300 dpi(default)
High resolution: 600x600 dpi
Maximum scanning
speed for A4 size
document
Color High resolution 13 Seconds
Mono High resolution 6.0 Seconds
Color Low resolution 3.0 Seconds
Mono Low resolution 2.0 Seconds
Capacity (Based on
1GB microSD card.
Scan A4 size file,
the quantity of scans
varies depending on
the content complexity) 600dpi color
600dpi mono
300dpi color
300dpi mono
USB
220 Photos(Min.)
290 Photos(Min.)
780 Photos(Min.)
1280 Photos(Min.)