Lenco Grid-7 User Manual

Page 7

Micro-SD card play: Music format of MP3, WMA and WAV can be supported and

capacity of the card can be supported “up to 32G”.

Using PC to transfer file into the unit: Unit has to be in power off and card is inserted

into it, connecting PC to unit using Micro-USB slot, PC can detect unit as a drive and music
files can be transferred from PC to the unit. Deleting file from card can also be done.

Bluetooth function:Press “MODE” button to change as Bluetooth mode,turn on

smartphone with setting BLUETOOTH as ON, carry out Bluetooth scan until LENCO-GRID 7
is appeared, enter the PIN as (0000) to pair the unit until successful.(Bluetooth distance: 10
meters no obstacle.)

4. Bluetooth handsfree function(after smartphone is paired with the Bluetooth):When

there is an incoming call, please press

to pick up phone call on the speaker, press

again when phone call is finished.

5. Line-in: attached 3.5m audio cable, connect with line out of PC,MP3/MP4,Smartphone
or other external audio device.

NFC(Near Field Communication): Place the smartphone close the NFC mark for easy

Bluetooth

connection. Before using NFC, smartphone is required to have NFC function and

set NFC and Android beam as ON.

Charging condition (Unit charging): When AC/DC adapter connects to DC in jack or

computer connects to Micro-USB slot by USB cable on the unit,”charge” indicator show red
as indicating the charging status. Four indicators are ON when charging is finished and
power is full. Charging time: 16 hours for empty battery

Charging condition (Smartphone charging): Connect USB port to Smartphone with

appropriate USB cable can unit can charge smartphone at on, off or standby mode.

9. Hand belt Installation