Lenco DVP-9412 - Manual (Page 5)

4
Remote control unit
Identification of Controls
1. SOURCE
DVD/CARD/USB.
3.0-9 NUMBER BUTTON
Selects numbered items in a menu.
4.INFO
To display the playtime and status information.
2. MUTE
Disable Audio output.
5.10+ RECALL
In order to select a track 10 or greater, first press 10+, For example;
select track 12, first press 10+, and then press number 2 button.
6. PBC/FAV
PBC on/off switch (VCD) .
7.AUDIO
Press AUDIO repeatedly during playback to hear a different
audio language or audio track, if avilable.
Press AUDIO repeatedly during playback to
hear a different audio channel ( Left,Right,Mix,Stereo).
DVD
VCD CD
10.STEP/TV/RADIO
Step the motion in DVD mode.
14. BUTTON
Press BUTTON allow skipping ahead at 5-level speed(X2->X4->
X8->X16->X32->PLAY), press PLAY button return to normal playback.
8.PLAY/PAUSE
Press PLAY/PAUSE once to pause playback, pressing PLAY/
PAUSE second time will resume the playback.
13.Reverse Skip
Go to previous chapter/ track to the beginning.
12.Forward Skip
Go to next chapter/ track.
9.STOP
When this buttom is pressed once, the unit records the stopped
point,from where playback will resume if PLAY( )is pressed after
wards. But if STOP button is pressd again instead of PLAY( )
button, there will be no resume function.
11.VOL+
Adjust volume
1 2 3 4
5 6 7 8
9 0
SETUP
OK STEP/
TV/RADIO
SUBTITLE AUDIO
MUTE SOURCE
VOL+ VOL-
SLOW
/EXIT
ZOOM
INFO
REPEAT
PROGRAM
ANGLE
10+
/RECALL
PBC
/FAV
TITLE
16
17
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
27
26
25
22
23
24
21
20
18
19