Remote control introduction – Lenco DVP-741 User Manual

Page 6

Remote Control

Introduction

Remote Control

Note:

1. In this manual,

will be used to represent different NAVIGATION ARROWS on

the remote respectively.

2. In order to operate any of the remote functions, you must first press the Power button on the

DVD player.

3. Some of the keys is multiple key. They can be used in DVD mode or in DVB mode.

CR2025

HOW TO REPLACE THE BATTERY

STEP 1: PUSH THE BUTTON TOWARD LEFT;
STEP 2: PULL THE BATTERY LOADER OUT.

BATTERIES
INCORRECT USE OF BATTERIES MAY CAUSE THEM TO LEAK, CORRODE OR EXPLODE.

Be sure to place the batteries in the correct direction.
It is dangerous to charge/heat/open or short-circuit the batteries.
Do not leave dead or expired batteries or mix old/new batteries.
When not using the remote control for a long duration of time, remove the batteries. When

operating range becomes reduced, replace all batteries with new, fresh ones.

If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then

replace.

This manual is related to the following products:

DVP-941