Lenco DVL-2483 - Manual (Page 24)

DVD Operation
DVD Operation
DVD System Setup
change them again.
General Steps of Setup Menu
1. Pause or Stop the player. Press SETUP on the remote control. The main menu will be
shown as below.
2. Press the ∧ / ∨ button to select the Icon of the desired section, e.g. “TV System" and press
> button to open that section.
3. Press ∧ / ∨ to select the desired feature and again press > button to open that section.
4. Press ∧ / ∨ to select the desired feature and then press " OK" to select the new setting.
5.To exit the menu, press " SETUP " or ∨ button to select EXIT SETUP and then press
" OK" When launching the setup routine, the pressing of the following buttons will turn off the
setup menu, while the choices that have been changed will be saved.
1. SYSTEM SETUP
The system setup options are illustrated below:
TV SYSTEM
According to the Color system of your TV, select proper TV TYPE.
PASSWORD
The password option is initialized as locked. You cannot set the ratings limit or change the
password. To enable these features you must unlock the Password. The default password is
21