Lenco CS-472 User Manual

Page 3

1. Before Operation

1.1 Precautions

1. Read through this instruction manual before installation and use.

2. Clear the panel and case with soft dry cloth only, do not apply any kind of thinner,

alcohol or sprays.

3. The apparatus shall not be exposed to dripping or splashing .

1.2 Battery Information of the Remote Control

Replace Battery in the Remote Control:

1.Before using the remote control for the first time, pull the insulating sheet out of the

remote control as the direction indicated by the arrow.(see fig.1)

2.Press the movable block hold as the direction indicated by the A arrow (See fig.2),

then pull the battery holder out of the remote control as the direction indicated
by the B arrow(see fig.2).

3.Replace the old battery by a new battery with (+) polarity side upward. (See fig.3).
4.Insert the battery holder to the original position in remote control. (See fig.3).

Note about the Battery of the Remote Control:

1.Improper use of battery may cause overheating or explosion. so that Result in injury or fire .
2.Battery leakage may cause damage to the remote control(Battery Life: 6 months with

normal use in normal room temperature).

3.Do not short the battery.
4.Do not throw the battery into the fire.
5.To avoid the risk of accident, keep the battery out of reach of children.