Lenco BTS-110 - Manual (Page 8)

No response from speaker  Restart the speaker by power Off and On.
4. Specification
Dimension 80 mm (H) x 73 mm (W) x 73 mm (D) (Approximate)
Weight 260g (Approximate)
Bluetooth
Specification V2.1 + EDR
Supported Profile A2DP, AVRCP, HSP
Connection Distance In 10 meters (open area)
Built-In Battery
Lithium 3.7V, 550mAh
Playing Time: 2 – 3 Hours (at 50% of volume setting)
Power / Charging Input PC’s USB port Power or DC 5V, 500mA
Audio
Rated Output Power
RMS 2W at 3 Ohm
Max. 2.5 ~ 3W
Frequency Responses 120Hz to 20,000Hz
I/O
Audio In Link 600mV RMS, 10K Ohm
Audio Out Link Depend on source device’s levels
Operating Temperature 0 to 40℃
5. Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instruction, specifications and pictures in this documentation may differ slightly
from your particular situation. All items described in this guide for illustration purposes only
and may not apply to particular situation. No legal right or entitlements may be obtained
from the description made in this manual.
6. Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany 0900-1520530 (Local charges)
The Netherlands 0900-23553626 (Local charges + 1ct p/min)
Belgium 02-6200115 (Local charges)
France 03-81484280 (Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
When contacting Lenco, you will always be asked for the model and serial number of your
product. The serial number can be found on the back of the device. Please write down the