Typical wire routing, Xpe series installation, Main power connections – Dual XPE1700 User Manual
Page 6
6
XPE SERIES
INSTALLATION
REM
(TURN-ON LEAD)
Fuse Rating
When replacing fuses, make sure new fuse
is the correct type and amperage. Using an
incorrect fuse could damage the amplifier.
XPE1700 30 amp ATO x 2
XPE2700 30 amp ATO x 1
XPE4700 25 amp ATO x 2
Power/Ground Wire Size
For optimum performance, use only the wire
size listed below or larger. Make sure to use
the same size power and ground wire.
XPE1700
4 awg
XPE2700 10 awg
XPE4700 8 awg
Main Power Connections
Connect +12V, GND and REM wires accordingly. A suitable fuse MUST be installed on the
+12V lead within 18" of the battery for protection of the vehicle’s electrical system.
Typical Wire Routing