Lenco BT-4304 - Manual (Page 11)

Safety instructions - continued
 Do not use this device when condensation may occur.
This device is produced according to all current safety regulations. The following
safety tips should safeguard users against careless use and dangers involved with
such use.
 Although this device is manufactured with the utmost care and checked several
times before leaving the factory, it is still possible that problems may occur, as
with all electrical appliances. If you notice smoke, an excessive build-up of heat or
any other unexpected phenomena, you should disconnect the plug from the main
power socket immediately.
 This device must be well ventilated at all time!
 This device must operate on a power source as specified on the specification
label. If you are not sure of the type of power supply used in your home, consult
your dealer or local power company.
 The socket outlet must be installed near the equipment and must be easily
accessible.
 Do not overload AC outlets or extension cords. Overloading can cause fire or
electric shock.
 Devices with a Class II adaptor do not need a earthed connection.
 Keep away from rodents. Rodents enjoy biting on power cords.
 Always hold the plug when pulling it out of the main supply socket. Do not pull the
power cord. This can cause a short circuit.
 The screen is made of plastic and can break when damaged. When broken, be
careful with sharp edged plastic splinters to avoid injury.
 Avoid placing the device on any surfaces that may be subject to vibrations or
shocks.
 To protect the device during a thunderstorm, unplug the AC power cable.
 When the device is not in use for long periods, unplug the AC power cable for
safety reasons.
 Do NOT knock on, press, hit or shake the screen as you may damage the internal
circuits.
 To clean the device, use a soft dry cloth. Do NOT use solvents or petrol based
fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
 Lenco is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device.
WARNING: Long-term exposure to loud sounds may lead to temporary or
permanent hearing impairment.
Declaration of Conformity
Products with the CE marking comply with the EMC Directive
(2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by
the Commission of the European Community.