Naim Audio HeadLine - Manual (Page 6)

4
4 Product Introduction
This manual covers installation and
operation of the NAPSC and i-Supply
power supplies, Headline headphone
amplifier and Stageline phono amplifier.
All these products are fundamentally
straightforward in use, however a little
time spent reading will help ensure
problem-free installation and use.
Equipment should be installed in its final
location before connecting cables or
switching on. Ensure that power amplifiers
are switched off and the preamplifier
volume is turned down before power
supplies are switched on.
power output
Connect to appropriate
accessory power input socket.
5 NAPSC
The NAPSC is a high quality power
supply designed to power one Naim
accessory product or the control circuits
of a preamplifier. NAPSC is fitted with a
captive lead terminated by a custom
2-pin plug.
mains input
5.1 NAPSC rear Panel
accessories