Naim Audio NAP 500 - Manual (Page 34)

e32
NARCOM 4 Remote Handset
30 narCom 4 remote Handset
The narCom 4 remote handset is supplied with the naC 552, naC 252, naC 282, naC
202, naC 152 Xs, supernait, nait Xs and nait 5i. It is a multi-functional remote control
handset designed to be used with naim audio CD players, integrated amplifiers,
preamplifiers, preset tuners and subwoofers.
To fit batteries, remove the battery cover and insert the batteries into the body taking care
with their orientation. replace the battery cover.
System Component Keys
Numeric keys (Soft)
Global Keys (CD)
Volume and mute keys
Prog Key (Soft)
Disp Key (Soft)
30.1 using narCom
Operation of the NARCOM 4 handset is based around
three types of keys:
system Component Keys , Global Keys
and soft Keys .
system Component Keys keys switch the operation of
the soft Keys into modes appropriate to each system
component (CD player, preamplifier, etc.).
Global Keys operate specific component functions
regardless of the system Component Key setting and are
available at all times.
Preamplifier and Integrated Amplifier Global Keys operate
as follows:
vol ( 5 & 6 ) Adjusts the preamplifier volume and the
volume control position.
mute Reduces the preamplifier volume to zero. A
second press restores the volume.
bal ( 3 & 4 ) Adjusts the channel balance. Some
Naim amplifiers have control of channel
balance available only from the remote
handset. On these products the balance
will automatically centre as it reaches
the mid point. Centring is indicated by a
flashing volume control indicator. To resume
adjustment once the balance has centred,
the
bal key must be released and re-
pressed.
mon Enables the output of a tape recorder to
be heard while recording. The source to be
recorded is chosen by the input selection
buttons in the normal way. A second
operation of the mon key restores normal
operation. Mon alternatively operates the
mono function on appropriately equipped
preamplifiers.
Preamplifier and Integrated Amplifier soft Keys operate as
follows:
disp Switches the front panel button indicators off
and on.
prog Press and hold to switch the preamplifier or
integrated amplifier into program mode.
numeric Enables direct selection of source inputs.
30.2 narCom 4 Keys