Volvo 2009 S60 - Manual (Page 220)

10 Audio
Radio functions HU-650/HU-850
10
220
The volume level for the auxiliary device can
now be adjusted.
Press EXIT to save the setting and exit the
menu.
Sound settings
G027191
Optimal sound reproduction
The audio system is calibrated for optimal
sound reproduction through the use of digital
signal processing. This calibration takes into
account the speakers, amplifier, cabin acous-
tics, the seating position of the listener, etc., for
each combination of vehicle and audio system.
There is also dynamic calibration that takes
into account the setting of the volume control,
radio reception, and the vehicle's speed. The
sound settings described in this manual, such
as
BASS , TREBLE , and EQUALIZER are only
intended to enable the user to adapt sound
reproduction to his/her personal preferences.
Bass
Adjust the bass by pressing the button to
extend the control and turning it to the left (less
bass) or to the right (more bass). A "detent"
indicates "equalized" bass. Press the button
back in when you have made the adjustment.
Treble
Adjust the treble by pressing the button to
extend the control and turning it to the left (less
treble), or to the right (more treble). A "detent"
indicates "equalized" treble. Press the button
back in when you have made the adjustment.
Fader - Balance front/rear
Adjust front/rear speaker balance by pressing
the button to extend the control and turning it
to the left (more sound from the rear speakers)
or to the right (more sound from the front
speakers). A "detent" indicates "equalized"
balance. Press the button back in when you
have made the adjustment.
Balance right/left
Adjust left/right speaker balance by pressing
the button to extend the control, and turning it
to the left (more sound from the left speakers)
or to the right (more sound from the right
speakers). A "detent" indicates "equalized"
balance. Press the button back in when you
have made the adjustment.
MID EQ level
This function is used to fine-tune the balance
of sound in the speakers. To set the level:
1. Press SOURCE.
2. Turn the SOURCE knob, select
ADVANCED MENU and press SOURCE.
3. Turn the SOURCE knob, select AUDIO
SETTINGS and press SOURCE.
4. Turn the SOURCE knob, select MID EQ
LEVEL and press SOURCE.
5. Turn the SOURCE knob, select the desired
level and press SOURCE.
6. Press EXIT.