Ryobi RC960 - Manual (Page 6)

Page 6
READ ALL INSTRUCTIONS
■ READ THESE INSTRUCTIONS AND THE INSTRUC-
TIONS FOR YOUR HP962 DRILL-DRIVER THOR-
OUGHLY before using this radio charger.
■ DO NOT CONNECT YOUR RADIO CHARGER TO
POWER SUPPLY UNTIL YOU HAVE READ AND
UNDERSTOOD ALL PRECAUTIONS AND OPERATING
INSTRUCTIONS IN THIS MANUAL AND PRINTED ON
RADIO CHARGER.
■ KNOW YOUR RADIO CHARGER. Read operator's
manual carefully. Learn its applications and limitations as
well as the specific potential hazards related to this radio
charger.
■ CHARGE ONLY THE RECOMMENDED BATTERY
PACK. Any attempt to use another battery pack will
cause damage to your radio charger and could possibly
explode, cause a fire, or personal injury.
■ DO NOT DISASSEMBLE YOUR RADIO CHARGER.
■ DO NOT PERMIT CHILDREN TO USE RADIO
CHARGER. It is not a toy.
■ KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
■ AVOID DANGEROUS ENVIRONMENT. DO NOT use
radio charger in a damp or wet environment or near a sink,
tub, pool, or the like.
RULES FOR SAFE OPERATION
■ KEEP DRY, CLEAN, AND FREE FROM OIL AND
GREASE. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products or
any strong solvent to clean your radio charger.
■ STAY ALERT. Watch what you are doing and use com-
mon sense. Do not rush.
■ CHECK DAMAGED PARTS. Before further use of this
radio charger, a part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Do not use radio charger if
it does not function properly.
■ ALWAYS DISCONNECT RADIO CHARGER FROM
POWER SUPPLY WHEN NOT IN USE.
■ SAVE THESE INSTRUCTIONS. Refer to them frequently
and use to instruct other users. If you loan someone this
tool, loan them these instructions also.
IMPORTANT INFORMATION
Avoid mounting or storing your radio charger
in these areas:
■ Areas exposed to direct sunlight or near appliances that
generate heat.
■ Areas not well ventilated or dusty.
■ Areas subject to constant vibration.
■ Humid or moist areas.
■ High traffic areas.
■ Areas that children can reach.
Look for this symbol to point out important safety precautions. It means attention!!!
Your safety is involved.
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and a full face shield when
needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shields. Always wear eye protection which is marked to comply
with ANSI Z87.1.
WARNING: