Ryobi SSP050 - Manual (Page 3)

3 — English
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
SAVE THESE INSTRUCTIONS. To reduce the risks of
fire or explosion, electric shock, and the injury to per-
sons, read and understand all instructions included in
this manual. Be familiar with the controls and the proper
usage of the equipment.
READ ALL INSTRUCTIONS
 KNOW YOUR POWER TOOL. Read the operator’s
manual carefully. Learn the machine’s applications and
limitations as well as the specific potential hazards related
to this tool.
WARNING:
To reduce the risk of fire or explosion:
 Do not spray flammable or combustible materials near
an open flame or sources of ignition such as cigarettes,
motors, and electrical equipment.
 For units intended for use with only water-based or
mineral spirit-type materials with a minimum flash point
of 60°C (140°F), do not spray or clean with liquids having
a flash point less than 60°C (140°F).
 Paint or solvent flowing through the equipment is able to
result in static electricity. Static electricity creates a risk
of fire or explosion in the presence of paint or solvent
fumes. All parts of the spray system, including the pump,
spray gun, and objects in and around the spray area shall
be properly grounded to protect against static discharge
and sparks.
 Verify that all containers and collection systems are
grounded to prevent static discharge.
 Connect to a grounded outlet and use grounded extension
cords. Do not use a 3-to-2 adapter.
 Do not use a paint or a solvent containing halogenated
hydrocarbons.
 Keep spray area well ventilated. Keep a good supply of
fresh air moving through the area. Keep pump assembly
in a well-ventilated area.
 Do not smoke in the spray area.
 Do not operate light switches, engines, or similar spark-
producing products in the spray area.
 Keep area clean and free of paint or solvent containers,
rags, and other flammable materials.
 Know the contents of the paints and solvents being
sprayed. Read all Material Safety Data Sheets (MSDS)
and container labels provided with the paints and
solvents. Follow the paint and solvent manufacturer’s
safety instructions.
 Fire extinguisher equipment shall be present and
working.
WARNING: To reduce the risk of skin injection:
 Do not aim the nozzle at, or spray any person or
animal.
 Keep hands and other body parts away from the
discharge. For example, do not try to stop leaks with
any part of the body.
 Always use the spray tip. Do not spray without spray
tip in place.
 Only use a spray tip specified by the manufacturer.
 Use caution when cleaning and changing spray tips.
In the case where the spray tip clogs while spraying,
follow the manufacturer’s instructions for turning off
the unit before removing the spray tip to clean.
 Do not leave the unit energized while unattended. When
the unit is not in use, turn off the unit in accordance
with the manufacturer’s instructions.
 High pressure spray is able to inject toxins into
the body and cause serious bodily injury. In the
event that injection occurs, seek medical attention
immediately.
 Check parts for signs of damage. Replace any
damaged parts.
 This system is capable of producing 2500 psi. Only use
replacement parts or accessories that are specified
by the manufacturer and that are rated a minimum of
2500 psi.
 Know how to stop the unit quickly. Be thoroughly
familiar with the controls.
 Verify that all connections are secure before operating
this unit.
 For household use only.
WARNING: To reduce the risk of injury:
 Do not operate or spray near children. Keep children
away from equipment at all times.
 Do not overreach or stand on an unstable support.
Keep effective footing and balance at all times.
 Stay alert and watch what you are doing.
 Do not operate the unit when fatigued or under the
influence of drugs or alcohol.