Pontiac 2006 Solstice - Manual (Page 258)

Using the Air Compressor
without Sealant
To use the air compressor by itself to inflate a tire, do
the following:
1. Remove the air compressor accessory plug from
the air compressor.
2. Unlock the air compressor hose from the sealant
canister by pulling up on the lever.
3. Pull the air compressor inflator hose from the
sealant canister.
4. Push the air compressor inflator hose onto the
tire valve stem and push the lever down to
secure in place.
5. Ensure proper connection between the tire valve
stem and the air compressor hose by looking at
the air pressure gage. If there is not a pressure
reading while the compressor is running, the
connection between the inflator kit and the tire
is bad.
Check the attachment between the air compressor
hose and the tire valve stem.
6. Plug the air compressor accessory plug into an
accessory power outlet in the vehicle. See
Accessory Power Outlet(s) on page 3-15 for more
information.
5-66