D-Link DI-804HV - Manual (Page 3)

3
Restart Your Computer
Connecting Additional Computers To
The DI-804HV
Using additional Ethernet (CAT5 UTP) cables, connect your
Ethernet-equipped computers to the remaining Ethernet LAN ports
on the back panel of the DI-804HV.
M1 LED – will flash
consistently to indicate
that the DI-804HV is
working properly.
POWER LED – a solid
light indicates a proper
connection to the
power supply.
M2 LED – a solid light
indicates that Internet
connection has been
established.
WAN LED – a
solid light indicates
connection on the
WAN port. This
LED blinks during
data transmission.
LOCAL NETWORK
LEDs – a solid light
on the port indicates a
connection to an
Ethernet enabled
computer on ports 1-4.
This LED blinks during
data transmission.
COM LED – a solid
light indicates a proper
connection to a dial-up
modem.