Specifications – Wisdom Audio Series SA-3 User Manual

Page 19

Specifications

All specifications are subject to change at any time, in order to improve the
product.

■

Rated power output:

500 w/ch continuous rms power @ 4Ω

above power ratings from 20 Hz–20 kHz at <0.5% THD

■

Peak output current:

> 30 amps

■

Voltage gain:

31 dB

■

Input sensitivity:

1.2V for full output

■

Input impedance:

25 kΩ (balanced)

■

Polarity:

Non-inverting, Pin 2 positive

■

Signal to Noise ratio (main outputs):

–103 dB (ref 1V rms, A-wtd.)

■

Output impedance:

less than 0.05Ω from 20–20,000 Hz

■

Recommended load impedance:

2–8Ω

■

Thermal load:

7 BTU/minute or less

■

Mains voltage:

100V, 120V, or 230/240V

determined by the needs of country for which

the unit was manufactured; cannot be reset by dealer or user

■

Overall dimensions:

See “Dimensions”

■

Shipping weight:

34 lbs. (15.4 kg)

■

Power consumption:

1870W (±5%) at full power, all channels driven

10W (±5%) at idle

2W (±5%) in standby

For more information, see your Wisdom Audio dealer, or contact:

Wisdom Audio
1572 College Parkway, Suite 164
Carson City, NV 89706
www.wisdomaudio.com
[email protected]
Ph: 775.887.8850
Fax: 775.887.8820