Wisdom Audio Series SA-2 - Manual (Page 6)

6
Placement Considerations
PRECAUTION
For your protection, review “Important Safety Instructions” and
“Operating Voltage” before you install your SA-2.
Note that adequate clearance for the AC cord and connecting signal cables
must be left behind your SA-2. We suggest leaving at least six inches (15 cm) of
free space behind your SA-2 so all cables have sufficient room to bend without
crimping or undue strain.
If possible, the SA-2 should also be placed in such a way that the power switch
on the rear panel is easily accessible. This switch disconnects power from the
unit completely, resulting in effective disconnection of the SA-2 from the AC
mains. You might think of this as a “vacation switch,” should you wish to turn
off your system completely when you will be away from home for a prolonged
period of time. Just remember to turn it back on again when you return.
Ventilation Your Wisdom Audio SA-2 has relatively modest ventilation requirements, thanks
to its remarkably efficient design. Typically, it becomes only modestly warm
during normal operation. Still, please be certain to keep the vents on the sides
of the amplifier clear of any obstruction. (The rack mount attachments have cor-
responding vents.)
Mechanical drawings are included in this manual to facilitate special installa-
tions where necessary (see “Dimensions” at the end of this manual).