Wisdom Audio Sage Series P20 - Manual (Page 8)

8
Unpacking & Setting Up the P20
The Wisdom Audio Sage P20 freestanding speaker is a substantial piece of
equipment. Please exercise caution when unpacking your P20 to ensure that
you do not strain yourself from its (perhaps unexpected) weight.
Caution! Do not attempt to lift your P20 while bending or twisting from the
waist. Use your legs for lifting, not your back.
Always stand as straight as possible and keep the P20 close to your
body to reduce strain on your back.
The P20 is shipped in a “telescoping” box (two five-sided boxes, one of which
fits snugly inside the other). Gently roll the box over so that its bottom is facing
up. Then carefully cut the tape along the bottom of the box on all four sides.
Roll the box over again so the bottom is on the floor, and lift off the top. With
one person at each end, carefully lift the speaker out of the box and lay it on a
soft surface (carpet or similar).
We do not recommend removing the grille on your new loudspeakers. The
grille is an integral part of the design; moreover, the planar magnetic film should
never be touched, as it is tensioned precisely at the factory. The grille plays an
important protective role as well as an aesthetic one.
After unpacking your P20, keep all packing materials for future transport. In
the event that you need to ship your P20, only the original, purpose-designed
shipping carton is acceptable. Any other method of shipping this product runs
a significant risk of damage to the P20 —damage that would not be covered by
the warranty. (If you lose your packaging and need to ship your speakers, re-
placement packaging can be purchased from Wisdom Audio.)