Wharfedale Pro WPB-1 - Manual (Page 4)

INSTALLATION
WALL PLATE
Multiple mounting points are available on the wall plate for strong and secure
mounting options. Once a suitable location is located for the mounting of the WPB-1,
safely secure the wall plate to the wall making sure it is level and mounted properly to
provide adequate support of the weight and size speaker being used. Be sure to
consider the material that the wall is made of and be sure to secure the center
mounting points squarely in wall studs or supports with adequate screw lengths.
ARM
Once the wall plate is securely mounted, the arm mechanism should be attached
using the provided nut and bolt.
TILT
The tilt mechanism provides four screw holes in a standard OmniMount™ 60.0
configuration for attachment to the bottom of the speaker. The tilt mechanism can be
mounted directly on the arm, with the provided hardware. Optionally, the tilt
mechanism can be mounted to the bottom of the speaker prior to mounting it to the
arm. Adjust the desired tilt angle of the speaker with the provided nuts and bolts and
once the proper angle is determined, tighten the nuts securely to hold the desired
position.
WHARFEDALE PRO LIMITED WARRANTY
The Wharfedale Pro WPB-1 Wall Bracket is warranted to be clear of manufacturing or
material defects for a period of one year from the original date of purchase. In the
event of malfunction, contact your authorized Wharfedale Pro dealer or distributor for
information.
*Be aware that warranty details may differ from country to country. Contact your dealer or distributor for
information. These terms do not infringe your statutory rights.