Wharfedale Pro SL424USB - Manual (Page 9)

SL424USB
Multi-Channel Mixer
8
CHANNELS 5/6 – 7/8:
These channels allow you to plug stereo line level devices (digital
keyboards, sequencers, interfaces etc.) into the mixer.
3 +4 / -10dB switch: to get the best signal to noise ratio
when plugging in various instruments and outboard gear.
STEREO EFFECTS RETURN
4 USB level: Adjusts the signal level of the USB playback.
5 USB to Main Mix : Send the signal from the USB input to
the Main Mix output jack.
6 USB to CR & Phones: Send the signal from the USB
input to the headphone and CR output jacks.
7 FX Send: Adjust the level of the signal sent to the FX output
jack.
8 FX Return: Adjust the level of the FX return input.
9 FX to Aux: Routes the FX send bus to the Aux bus.
20 CR & Phones : Adjust the signal sent to the headphone and
Control Room outputs
2 +48V: Phantom Power switch for condenser microphones
22 Phantom Power (+48v): Indicates global +48V supply
23 Power LED: Indicates AC input and operation
24 Output Meter + Clip LED: Displays the output level of the
Main Mix and if the Main Mix signal is clipping.
25 Main Mix : This allows you to adjust the level of the signal
going to the Main Mix output jacks
26 FX Return: Connect the output of an outboard effect processor to this input jack.
27 FX Send: Connect to the input of the outboard effect processor.
28 CR Out: Connect to the inputs of an external amplifier or powered speaker.
29 USB Connector: Connects to your computer for playback and recording.
30 Phones: For connecting stereo headphones.
3 Main Output: Balanced outputs; TRS and XLR jacks
32 AC POWER IN: Use the standard supplied IEC mains power cable.
33 POWER: Switch the SL424 on or off. Be sure you turn it on BEFORE switching equipment
connected to the output sends.
3
2
23
24
25
4
5
6
7
8
9
20
22
26 27 28 29 30
32 33 3