Wharfedale Pro Connect 1202FX/USB - Manual (Page 7)

CONNECT SERIES
6
USB INTERFACE
The USB connector enables computers with USB connectivity to interface directly with the
CONNECT mixer for full duplex recording and playback. In recent years the introduction of USB
connectivity has ushered a new appreciation of the capabilities of computer audio, helping to fuse
both digital and analogue and open up endless possibilities for the recording musician.
The internal AD (Analogue to Digital) and DA (Digital to Analogue) converters are 6-bit/48KHz
enabling recording and playback above CD quality, ensuring that recordings that you make with a
CONNECT mixer have outstanding quality.
The CONNECT mixer is fully class compliant and requires no drivers when used with modern
operating systems. Mac OSX, Windows XP, Vista and 7 will require no additional driver software.
Windows WIN7 Installation
Simply choose the device in the following location: Start > Control Panel > Hardware and Sound >
Sound > Manage Audio Devices
Mac OSX Installation
Simply select as an input and output device using the "Audio MIDI Setup" page, you can find this
easily using the spotlight function.
. USB Connector for Class Compliant Interfacing with a PC or Mac.
2. Controls the level of the USB inputs.
3. Sends the USB input signal to the headphone outputs.
4. Sends the USB input signal to the main mix bus.
USB In
USB to Phones
USB to Main
2
4
3