Wharfedale Pro WPM-1 - Manual (Page 9)

WPM-1
When mounting a WPM-1 take steps to ensure that all elements are
stable and safe at every step of the setup procedure. If any element feels
unbalanced or unsafe revert back to the previous step and ensure that all
connections are secure. Ensure that all mounting hardware is appropriate
and capable. Incorrect mounting of this product can cause serious injury
and damage to property.
6. Remove the boom arm mount receptacle cover, keep this in a
safe place should you need it again for a different application.
7. Place the boom arm mounting into the receptacle on the top of
the WPM-1.
. Screw the mounting into place by spinning the middle section
of the mounting hardware. You can loosen or tighten the
top section to adjust the microphone angle or tightness.
9. Attach all wiring starting with the audio connections.
The connectivity will depend on the application.
Once all audio connections are complete you are ready to connect
the AC supply, always ensure that the power switch is in the
off position and that all connected output devices are muted or have
gain/volume controls set to minimum.
Ensure that all wiring is neat and safe, take care to avoid creating
tripping hazards. Adequate length wires should be used to
avoid potential damage to connected equipment.
WPM-1 User Manual.indd 8 2011-1-24 10:29:25