Weston 330 lb Digital Scale - Manual (Page 5)

-5-
3. Press the “MODE” button to change the unit of measure (Figure 3).
OPERATING INSTRUCTIONS
1. Open the battery cover on the back side
of the Digital Control Display. Insert (1) 9V
battery and replace the battery cover. You
can also connect the 9V AC adapter to
connect the scale to an outlet (Follow the
outlet instructions outlined in this instruction
manual) (Figure 1).
2. Place the scale on a level surface and
press the “ON/OFF” button to turn on the
scale. The Digital Control Display will
illuminate, displaying all controls. When
stabilized, it will display “0.00” (Figure 2).
Figure 2
Figure 3
(LB) (LB:oz) (Kg)
4. If the Digital Control Display does not display “0.00 LB / 0 LB 0 oz / 0.00 Kg”,
press the “TARE” button to reset the display to “0.00”.
5. When the display shows or “Lo”, this is an indication that the battery
running low and will need to be changed soon (Figure 4).
Figure 4
Low Voltage
Figure 4