Weston Roma Apple & Fruit Crusher Hopper - Manual (Page 4)

-4- -5-
1. Align the pilot holes on the Left
Side Board (B) with the through
holes on the Back Board (A).
2. Affix the Left Side Board (B) to
the Back Board (A) with 3 Wood
Screws (H).
FIGURE 1
3. Align the pilot holes on the Right
Side Board (C) with the through
holes on the Back Board (A).
4. Affix the Right Side Board (C) to
the Back Board (A) with three Wood
Screws (H). FIGURE 2
5. Align the pilot holes on the Left
Side Board (B) with the through
holes on the Front Board (D).
6. Affix the Left Side Board (B) to
the Front Board (D) with three Wood
Screws (H). FIGURE 3
7. Align the pilot holes on the Right
Side Board (C) with the through
holes on the Front Board (D).
8. Affix the Right Side Board (C) to
the Front Board (D) with three Wood
Screws (H).
FIGURE 3
9. Attach the Left Mounting
Bracket (E) to the Back Board (A)
with the 1” Machine Screw, Washer
and Hex Locking Nut (F).
FIGURE 4
10. Attach the Right Mounting
Bracket (E) to the Back Board (A)
with the 1” Machine Screw, Washer
and Hex Locking Nut (F).
ASSEMBLY INSTRUCTIONS
Figure 1
Figure 2
Figure 3
Figure 4
A B
A
C
B
D
B
C A
A
C
B
ATTACHING THE HOPPER/TABLE MOUNT
1. Set the assembled Hopper on
top of the Apple & Fruit Crusher* .
FIGURE 5
2. Attach the Left Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the
1½” Machine Screw, two Flat
Washers & Hex Locking Nut (G).
FIGURE 6
3. Attach the Right Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the
1½” Machine Screw, two Flat
Washers & Hex Locking Nut (G).
TO ATTACH THE HOPPER TO THE APPLE & FRUIT CRUSHER* IN THE
TABLE MOUNT POSITION:
Figure 5
Figure 6
*Apple & Fruit Crusher Sold Separately.
NEVER reach into the Chute or Main Body.
Failure to do so, may cause personal injury. CAUTION!