Component list, Problem solving, Additional accessories available – Weston Food Dehydrators User Manual
Page 3

-3-
COMPONENT LIST
DIAGRAM
PART
PART
NUMBER
DESCRIPTION
NUMBER
1
Temperature Control Knob
75-0102
2
Dehydrator Tray
75-0103-N
3
Feet (4)
75-0104
YOGURT
1 quart milk
1/2 cup Powdered Milk
2 Tbsp Plain Yogurt (or 2-3 Tbsp of yogurt starter)
Fruits & Sweeteners
.
In a saucepan mix milk, powdered milk together, heat to scalding.
.
Remove from heat and let cool to 110°F (43
o
C).
.
Mix the yogurt well with the cooled scaled milk (if using yogurt starter, add to 1/3 cup scaled
milk and mix well, then return to the remaining milk).
.
Set the dehydrator to 108°F (42
o
C) NOTE: If the temperature is too high the yogurt will curdle.
If the temperature is too low, the yogurt will take longer to thicken.
.
Pour the milk yogurt mixture into flat containers and cover with plastic wrap.
.
Place the flat containers in the dehydrator for 2-4 hours or until thickened.
.
Remove the yogurt from the dehydrator and allow to cool.
.
Stir in the flavorings or fruits to taste.
MOISTURE IN THE CONTAINER
CAUSE:
Incomplete Drying. Food cut unevenly, thus incomplete drying.
Dried foods left at room temperature too long after cooling,
moisture has re-entered the foods.
PREVENTION: Test food for dryness before removing from the dehydrator. Cut
foods evenly. Cool quickly and package immediately.
__________________________________________________________________
MOLD ON FOOD
CAUSE:
Incomplete drying. Food not checked for moisture content within
a week. Storage container not air-tight. Storage temperature
too warm/moisture in food. Case hardening may have occurred,
meaning the food was dried at too high of a temperature and food
was dried on the outside but not completed dried on the inside.
PREVENTION: Test several food pieces for dryness. Check the storage
container within 1 week for moisture, then re-dry food if needed.
Use air-tight containers for storage. Store foods in cool areas
that are 70°F (21
o
C) or below. Dry foods at appropriate
temperatures/use the Drying Guide for reference.
__________________________________________________________________
BROWN SPOTS ON VEGETABLES
CAUSE:
Too high of drying temperature used. Vegetables were over-dried.
PREVENTION: Dry foods at appropriate temperatures/use the Drying Guide for
reference. Check foods often for dryness.
__________________________________________________________________
FOOD STICKING TO THE TRAYS
CAUSE:
Food not being turned over.
PREVENTION: After one hour of dehydrating, use a spatula and flip the foods.
PROBLEM SOLVING
-14-
ADDITIONAL ACCESSORIES AVAILABLE
ITEM
PART
DESCRIPTION NUMBER
The Original Jerky Gun
37-0101-W
Stainless Steel Mandoline Slicer
01-0006
Dehydrator Netting Roll 13.5” x 5.3”
78-0201-W
If any components of this unit are broken or the unit does not operate
properly, call Weston Products LLC Toll Free at
1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131
These products and many more products can be ordered by visiting
W e s t o n P r o d u c t s . c o m or by calling
Weston Products LLC Toll Free at 1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131